Filter
Top Products
34
Switching the IMPEDANCE SELECTOR switch on the
rear panel
Select the position whose requirements your speaker system
meets. Be sure to switch this only when the power of this unit is
turned off.
(Upper position)
Center: If you use one center speaker, the impedance of the
speaker must be 4Ω or higher.
If you use two center speakers, the impedance of each
speaker must be 4Ω or higher.
Rear: (U.S.A. and Canada models:)
The impedance of each speaker must be 4Ω or higher.
(Australia, Singapore and General models:)
The impedance of each speaker must be 6Ω or higher.
Main: If you use one pair of main speakers, the impedance of
each speaker must be 4Ω or higher.
If you use two pairs of main speakers, the impedance of
each speaker must be 8Ω or higher.
Front effect:
The impedance of each speaker must be 6Ω or higher.
WARNING
Do not change the IMPEDANCE SELECTOR switch setting
while the power to this unit is on, otherwise this unit may be
damaged.
IF THIS UNIT FAILS TO TURN ON WHEN THE POWER
SWITCH IS PRESSED
The IMPEDANCE SELECTOR switch may not be set to either
end closely. If so, set the switch to either end closely.
(Lower position)
Center: If you use one center speaker, the impedance of the
speaker must be 8Ω or higher.
If you use two center speakers, the impedance of each
speaker must be 4Ω or higher.
Rear: The impedance of each speaker must be 8Ω or higher.
Main: If you use one pair of main speakers, the impedance of
each speaker must be 8Ω or higher.
(Except Canada model:)
If you use two pairs of main speakers, the impedance of
each speaker must be 16Ω or higher.
Front effect:
The impedance of each speaker must be 8Ω or higher.
(General model)
A
B
SWITCHED
AC OUTLETS
IMPEDANCE SELECTOR
VOLTAGE SELECTOR
I20V
60Hz
I00W
MAX.
TOTAL
CENTER C OR D: 4
Ω
MIN./ SPEAKER
SET SPEAKER MODE
C
D: 4
Ω
MIN./ SPEAKER
SET SPEAKER MODE
REAR
6
Ω
MIN./ SPEAKER
MAIN
A
OR
B: 4
Ω
MIN./ SPEAKER
A B
: 8
Ω
MIN./ SPEAKER
FRONT EFFECT
: 6
Ω
MIN./ SPEAKER
CENTER C OR D: 8
Ω
MIN./ SPEAKER
SET SPEAKER MODE
C
D: 4
Ω
MIN./ SPEAKER
SET SPEAKER MODE
REAR
8
Ω
MIN./ SPEAKER
MAIN
A
OR
B: 8
Ω
MIN./ SPEAKER
A B
: 6
Ω
MIN./ SPEAKER
FRONT EFFECT
: 8
Ω
MIN./ SPEAKER
IMPEDANCE
SELECTOR