Filter
Top Products
54 En
TROUBLESHOOTING
■ iPhone/iPod
The following messages may be displayed on the front panel display in certain situations.
Message Status/Cause Remedy
See
page
Connect error There is a problem with the signal path
from your iPhone/iPod to the unit.
Turn off the unit and reconnect the Universal Dock
for iPod to the DOCK jack of the unit.
35
Remove your iPhone/iPod from the Universal Dock
for iPod and then place it back in the dock.
35
Unknown iPod The iPhone/iPod being used is not
supported by the unit.
Connect an iPhone/iPod supported by the unit.
35
Connected Your iPhone/iPod is properly placed in
the Universal Dock for iPod.
—
Your iPhone/iPod is properly placed in
the Wireless System for iPod and
connected with this unit via wireless
transmission.
37
Disconnected Your iPhone/iPod is removed from the
Universal Dock for iPod.
—
Your iPhone/iPod is disconnected with
this unit via wireless transmission.
—
The wireless connection is poor. Place the YID-W10 receiver as far away from this
unit as possible.
35
Problem Cause Remedy
See
page
When using the
Universal Dock for
iPod:
Your iPhone/iPod is
not being charged
even though it is
connected to the
Universal Dock for
iPod.
The iPhone/iPod is not connected
securely.
Connect the iPhone/iPod securely to the Universal
Dock for iPod.
—
When using the
Wireless System for
iPod:
Your iPhone/iPod is
not being charged
even though the YID-
W10 transmitter
connected to your
iPhone/iPod is
stationed in the YID-
W10 receiver.
The YID-W10 transmitter is not stationed
securely in the YID-W10 receiver.
Station the YID-W10 transmitter connected to your
iPhone/iPod securely in the YID-W10 receiver.
—