Filter
Top Products
FM/AM TUNING
20 En
There are 2 tuning methods; automatic and manual. Select either method according to your preference and the strength of
station signals.
Automatic tuning is effective when station signals are
strong and there is no interference.
1 Rotate the INPUT selector on the front panel
(or press TUNER on the remote control) to
select TUNER as the input source.
2 Press FM or AM on the front panel (or FM or
AM on the remote control) to select the
reception band (FM or AM).
FM or AM is displayed on the front panel display.
3 Press and hold TUNING/CH jj / ii on the
front panel (or TUN./CH H / I on the remote
control) for more than 1 second to begin
automatic tuning.
Press ii (or H) to tune in to a higher frequency.
Press jj (or I) to tune in to a lower frequency.
• When you tune in to a station, the frequency of the station is
displayed on the front panel display.
• If the tuning search does not stop at the desired station because
the station signals are weak, try using the manual tuning
method.
■ Auto Mute feature
When listening to an FM radio station, the output will
automatically be muted when the radio signal is weak if
the station was tuned in to by:
• using the automatic tuning feature
• recalling a preset that was registered using the
automatic preset registration feature
If you want to listen to a station that has a weak signal,
tune in to the station manually.
FM/AM TUNING
Automatic tuning
FM, AM
TUNING/CH jj / ii
INPUT selector
TUN./CH H / I
FM, AM
TUNER
Notes