Filter
Top Products
CONTROLS AND FUNCTIONS
11 En
INTRODUCTION
■ Yamaha CD player controls
The following buttons can be used to control a Yamaha
CD player when CD is selected as the input source for
Zone 2.
A Yamaha CD player control buttons
• s Stops playback
• e Pauses playback
• p Starts playback
• DISC SKIP Skips to the next disc in a CD changer
• b Skips backward
• a Skips forward
• Ejects the disc
• w Rewinds playback
• f Fast-forwards playback
Not all Yamaha CD players can be controlled by the Zone 2
remote control.
■ Installing batteries
■ Replacing the battery in the Zone 2
remote control
Change the battery when the operation range of the Zone 2
remote control decreases.
■ Operation range
The remote controls transmit a directional infrared beam.
Be sure to aim the remote controls directly at the remote
control sensor on the front panel of this unit or on the
infrared signal receiver in Zone 2 during operation.
Note
Using the remote controls
AAA, R03, UM-4 batteries
Straight pin
CR2025 battery
Approximately
6 m (20 ft)
Remote control or Zone 2
remote control