Yamaha HTR-5940 Stereo Receiver User Manual


 
69
SOUND FIELD PROGRAMS
SOUND FIELD
PROGRAMS
REV.LEVEL
Reverberation level. Adjusts the volume of the reverberation sound. The larger the value, the
stronger the reverberation becomes.
Control range: 0 to 100%
2ch Stereo
DIRECT
2-channel stereo direct. Bypasses the decoders and DSP processors of this unit for pure hi-fi
stereo sound when playing 2-channel analog sources.
Choices: AUTO, OFF
y
The “AUTO” setting bypasses the decoders and DSP processors only when “BASS” and
“TREBLE” are set to 0 dB (see page 31).
When multi-channel signals (Dolby Digital and DTS) are input, they are downmixed to 2
channels and output from the front left and right speakers.
The low-frequency signals input from the front left and right speakers are redirected to the
subwoofer in the following cases:
– “BASS OUT” is set to “BOTH” (see page 79).
– “FRONT” is set to “SMALL” (see page 78) and “BASS OUT” is set to “SWFR” (see
page 79).
6ch Stereo
CT LEVEL
SL LEVEL
SR LEVEL
SB LEVEL
6-channel stereo center, surround left, surround right, and surround back levels. Adjusts the
volume level of each channel in the 6-channel stereo mode.
Control range: 0 to 100%
Sound field parameter Features
(dB)
60 dB
Level
Source sound
Reverberation
REV.TIME
REV.DELAY
Time