Filter
Top Products
57
SET MENU
ADVANCED
OPERATION
■ Parameter initialization PARAM. INI
Use this feature to initialize the parameters for each sound
field
program within a sound field program group. When
you initialize a sound
field program group, all of the
parameter values within that group revert to their initial
settings.
MANUAL SETUP > OPTION MENU > PARAM. INI >
Press the corresponding numeric button for the sound
field
program that you want to initialize.
An asterisk (*) next to a program number means that the
parameter values have been changed from their initial
settings.
• You cannot automatically revert to the previous parameter
settings once you initialize a
sound field program group.
• You cannot separately initialize individual
sound field
programs.
• You cannot initialize any program groups when MEMORY
GUARD is set to ON.
■ Speaker impedance setting SP IMP.SET
Use to select the impedance of your speakers.
MANUAL SETUP > OPTION MENU > SP IMP.SET >
Choices: 6ohms, 8ohms
■ Zone set ZONE SET
Use to specify the location of speakers connected the
SPEAKERS B terminals.
MANUAL SETUP > OPTION MENU > ZONE SET >
SP B
Use this feature to select the location of the front speakers
connected to the SPEAKERS B terminals.
Choices: FRONT, ZONE B
• Select FRONT to turn on/off SPEAKERS A and B
when the speakers connected to the SPEAKERS B
terminals are set in the main room.
• Select ZONE B if the speakers connected to the
SPEAKERS B terminals are set in another room. If
SPEAKERS A is turned OFF and SPEAKERS B is
turned ON, all the speakers including the subwoofer in
the main room are muted and the unit outputs sound
from SPEAKERS B only.
• If you connect headphones to the PHONES jack on the unit, the
sound is output from both headphones and SPEAKERS B.
• When a DSP program is selected, the unit automatically enters
the Virtual CINEMA DSP mode.
Notes
123*4
*5678
9 *0 +10
C)PARAM. INI
/ : Exit
p
p
-/+ : Select
Minimum 8ohms
D)SP IMP.SET
Notes
/ : Exit
p
p
-/+ : Select
SP_B;;;;;;FRONT
E)ZONE SET
00_HTR-5790U_EN.book Page 57 Tuesday, December 9, 2003 9:16 AM