Filter
Top Products
SET MENU
47
ADVANCED
OPERATION
You can use the following parameters in the set menu to adjust a variety of system settings and customize the way this
unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening
environment.
■ Auto Setup
Use to specify which speaker parameters auto setup will adjust, and to activate the auto setup procedure (see page 24).
■ Manual Setup
Use to manually adjust speaker and system settings.
y
Most of the parameters described in the SOUND menu are set automatically when you run auto setup (see page 24). You can use the
SOUND menu to make further adjustments, but we recommend running auto setup first.
Basic menu
Use to quickly setup basic system parameters (see page 28).
Sound menu
Use to manually adjust any speaker setting or compensate for video signal processing delays when using LCD monitors
or projectors.
Input menu
Use to reassign digital input/outputs, select the input mode, rename your inputs, or specify external input settings.
SET MENU
Item Features Page
SPEAKER SET
Selects the output mode suitable for each speaker, the speakers for low-frequency signal output,
and the cross over frequency.
49
SP LEVEL
Adjusts the output level of each speaker.
50
SP DISTANCE
Adjusts the delay time of each speaker.
51
GRAPHIC EQ
Adjusts the tonal quality of each speaker.
51
LFE LEVEL
Adjusts the output level of the LFE channel for Dolby Digital or DTS signals.
51
DYNAMIC RANGE
Adjusts the dynamic range for Dolby Digital or DTS signals.
52
LOW FRQ. TEST
Matches the subwoofer level with the level of the other speakers.
52
HP TONE CTRL
Adjusts the tonal balance of the headphones.
53
AUDIO SET
Customizes overall audio settings of this unit.
53
PR/SBch SELECT
Selects priority to either surround back or presence speakers when both sets of speakers are
connected to this unit.
53
Item Features Page
I/O ASSIGN
Assigns jacks according to the component to be used.
54
INPUT MODE
Selects the initial input mode of the source.
54
INPUT RENAME
Changes the name of the inputs.
55
EXT.INPUT
Sets the direction of the signals input into the center, subwoofer and surround channels for the
source component connected to the MULTI CH INPUT jacks.
55
00_HTR-5790U_EN.book Page 47 Tuesday, December 9, 2003 9:16 AM