Yamaha GX707 Stereo System User Manual


 
E-23
English
Playing back a tape
Display information
Each indicator mentioned with a number on pages 24–30 corresponds to the indicator with the same number on this page.
1 Tape counter
2 NR (DOLBY NR)
3 Tape direction indicator
General information
Dolby B Type Noise Reduction
Dolby noise reduction is an extremely effective method of
reducing undesirable background hiss on tapes. The built-
in tape deck incorporates Dolby B type noise reduction
system.
DOLBY NR is useful for both recording and playback; be
sure that the same noise reduction is used on recording
and playback.
Dolby noise reduction is manufactured under license
from Dolby Laboratories Licensing Corporation.
“DOLBY” and the double-D symbol
are
trademarks of Dolby Laboratories Licensing
Corporation.
Do not use C-120 tapes or poor quality tapes, since they
can cause malfunctions.
Before loading a tape on the tray, tighten the tape slack
with a pen or pencil.
Tapes have removable tabs which prevent accidental
recording or erasing from taking place. Removing the
tab on the top left corner protects the side facing you
from erasure. Cover the tab holes with adhesive tape to
erase or record again.
The tape deck features an automatic tape selector. Just
load the tape, and the type of tape being used will be
sensed automatically.
The tape deck can play back metal tapes as well as
normal or high position tapes; however, recording
cannot be done on metal tapes with good sound quality.
About the tape counter
The tape deck is equipped with a tape counter that is
useful for searching and locating a desired point on the
tape. The tape counter is shown on the display.
Pressing
(stop) when the deck is being stopped will
reset the tape counter to “0000”.
4 Reverse mode indicator
5 TAPE
(input source indicator)
6 TAPE REC
100 350 1K 3.5K 10K
PROGRAMMUSIC
PRO LOGIC
HALL
3 STEREO YMERSION
EDIT
PROG
S F REP
VOLUME
AB
RANDOM
TUNER
CD
MD
TAPE
100 350 1K 3.5K 10K
MUSIC
EDIT
VOLUME
AB
REC
TAPE
TAPE
NR
PROGRAM
1
2345 67 8 9
7 (play)
8 EDIT
9 Tape side indicator