Yamaha GX707 Stereo System User Manual


 
E-21
English
Tuning operation
Automatic preset tuning
You can make use of an automatic preset tuning function. With this
function, the built-in tuner performs automatic tuning. Up to 40
stations [8 stations x 5 groups (A, B, C, D and E)] are stored
automatically.
1 Turn on the power.
2 Press INPUT or until “TUNER” (2, 7) appears on the
display, or simply press TUNER on the remote control.
3 Press and hold MEMORY for more than 2 seconds.
* The “MEMORY” (6) and “AUTO” (4) indicators flash.
The tuner performs automatic tuning and searches for FM stations
first and then AM stations. Received stations are programmed
sequentially to A1, A2, A3 and so on.
When the automatic preset tuning is completed;
The display shows the frequencies of the first preset station (stored
to A1).
If you want to check the contents and the number of preset stations,
follow the procedure in the section “To recall a preset station” on
page 22.
To recall a preset station
Simply follow the procedure in the section “To recall a preset
station” on page 22.
Notes
The automatic preset tuning search will be performed through all
frequencies until 40 stations are stored. If the number of received stations
is less than 40, the search will stop after searching all frequencies.
* Since FM stations are searched for first, there may be a case that 40
preset stations are occupied by FM stations only.
With this function, only stations with sufficient signal strength are stored
automatically. If the station you want to program is weak in signal
strength, tune in to it with the Manual tuning method (in monaural) and
program it by following the procedure in the section “To store stations”
on page 22.
You can replace a preset station with another FM or AM station
manually by simply following the procedure in the section “To store
stations” on page 22.
Memory back-up
The memory back-up circuit prevents the programmed data
from being lost even if the AC supply lead is disconnected from
the AC outlet or the power is cut due to temporary power
failure. If, however, the power is cut for more than one week,
the memory may be erased. If so, it can be re-programmed by
simply following the Preset tuning steps.
DISC3DISC2DISC1
3–DISC CD CHANGER
STANDBY
/
ON
STANDBY
TIMER
INPUT
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
/
UP
DOWN
PHONES
BASS TREBLE
MODE DOLBY NR
REC
/
PAUSE
AUTO
/
MANUAL
TIMER
MEMORY
TIME ADJ
RANDOM
HOUR
POWER
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
0
PRESET
TUNER
+
I0
PRESET
TIME
A
PROG
B
R.TIME
C
EDIT
D
DISC SKIP
MODE
E
CD
/
DIRECTION
LEVEL
REC
/
PAUSE
TEST
PROGRAM
CENTER
/
REAR
/
DELAY
MUSIC
SLEEP
INPUT
TAPE
VOLUME
1
2
3
2
2
1