Filter
Top Products
E-34
HOW TO USE THE BUILT-IN TIMER
Sleep timer operation
This unit can be turned off automatically.
1 Play the desired sound source.
2 Press the SLEEP button. “SLEEP: 120min” appears on
the display.
3 Press the SLEEP button repeatedly until the desired sleep
time appears on the display. The display will change as
described below. (Time is displayed by the minute.)
* A normal display mode will resume about 4 seconds
after the selection is made.
* The SLEEP indicator will light up to indicate that the
sleep timer is on.
4 The unit will turn off automatically when the selected sleep
time has passed.
To confirm the sleep time setting
Press the SLEEP button once. The remaining time of the
selected sleep time will be displayed.
To change the sleep time
While the SLEEP indicator is being illuminated, press the
SLEEP button repeatedly until the desired time appears.
To stop the sleep timer operation
Press the POWER switch, or press the SLEEP button
repeatedly until a normal display mode is restored.
(The SLEEP indicator will go out.)
Using the timer and the sleep
timer at the same time
1 Prepare timer play. (See page 32.)
* Do not turn the power of this unit off after the timer
setting is finished.
2 Press the SLEEP button and set the sleep time.
When the sleep timer operation finishes, the timer will
function to turn the source on at the preset time.
Note
Do not make the timer time setting so that the timer will start
during sleep timer operation. (Since sleep timer operation
has priority, the timer will not operate.)
Normal display
mode
(Sleep timer is off.)
120min 90 min 60 min 30 min
↑
↑
↑
↑
↑
POWER
POWER
SLEEP
CD
TUNER
TAPE
POWER
123
123
FM/AM
456
456
789
789
0
0
CD/TUNER
+
10
DISPLAY
SLEEP
AUX
PLAY/PAUSE
TIME
REPEAT
STOP
TAPE
EDITPROG
RANDOM
MUSIC
LOCATION
USER
VOLUME
TAPE
A
B
REC/
PAUSE
DECK