Filter
Top Products
E-30
Storing your own programs
You can store an equalizer pattern of your own adjusting. Up
to 4 patterns can be stored as desired.
To store
1 Adjust the equalizer as you prefer by using the equalizer
control buttons.
2 Press the user program MEMORY button.
* “USER 1” will flash on the user program number
indicators for about 5 seconds.
3 Select the user program number (USER 1, 2, 3 or 4) to
which you will store the equalizer pattern by pressing the
USER button once or more before “USER 1” stops
flashing.
* Whenever you press the USER button, the user
program number changes and is displayed as follows.
4 Press the user program MEMORY button before the
number selected in step 3 stops flashing.
* In the same way, store other patterns to other three user
positions.
Notes
• A new program can be stored in place of the former one.
• In step 3 or 4, if the user program number indicator stops
flashing before operation, return to step 2.
To recall a user program
11 Playback a source. (For source playback, refer to the
sections beginning on page 9.)
22 Press the USER button once or more so that the user
program number you want to recall lights up.
GRAPHIC EQUALIZER/SOUND FIELD PROCESSOR CONTROL
USER 1 USER 2
USER 3
USER 4
USER 1
USER 2
USER 3
USER 4
2, 43, 2
1
CD
TUNER
TAPE
POWER
123
123
FM/AM
456
456
789
789
0
0
CD/TUNER
+
10
DISPLAY
SLEEP
AUX
PLAY/PAUSE
TIME
REPEAT
STOP
TAPE
EDITPROG
RANDOM
MUSIC
LOCATION
USER
VOLUME
TAPE
A
B
REC/
PAUSE
DECK
1
3, 22