Filter
Top Products
E-35
English
Adjusting CENTER LEVEL
If desired, you can adjust the sound output level of the center
speaker even if the output level is already set in “SPEAKER
BALANCE ADJUSTMENT” on pages 14 to 15.
Control range : +10 to –21
1 Press the CENTER/REAR/DELAY selector button once or
more so that “CENT” appears on the display.
2 By continuously pressing the LEVEL control + or – button,
the level value changes continuously.
Notes
● This adjustment can be made only when the sound field
program DOLBY PRO LOGIC or DOLBY 3 STEREO is
selected.
● Once the output level is adjusted, the level value will be
the same in the DOLBY PRO LOGIC and DOLBY 3
STEREO programs.
● If the center channel mode is in the “PHANTOM” position,
the sound output level of the center speaker cannot be
adjusted. This is because in this mode, the center sound
is automatically output from the left and right front
speakers.
USING SOUND FIELD PROCESSOR
1
1
2
2
3
3
4
4
5
5
TIME
A
DISC SKIP
PROG
B C D
+I0
E
OPEN
/
CLOSERANDOM
REPEATMODE
6
6
7
7
8
8
9 0
CD
PRESET
TUNER
STOP
INPUT
PLAY
/
PAUSE
LEVEL
MUSIC
TEST FLAT
CENTER
/
REAR
/
DELAY
PROGRAM
USER
STANDBY/ON
DISPLAY
SLEEP
VOLUME
Adjusting REAR LEVEL
If desired, you can adjust the sound output level of the rear
speakers even if the output level is already set in “SPEAKER
BALANCE ADJUSTMENT” on pages 14 to 15.
Control range : +10 to –21
1 Press the CENTER/REAR/DELAY selector button once or
more so that “REAR” appears on the display.
2 By continuously pressing the LEVEL control + or – button,
the level value changes continuously.
Notes
● This adjustment can be made when a sound field program
except DOLBY 3 STEREO is selected.
● Adjustment can be made to DOLBY PRO LOGIC, HALL
and ARENA individually.
2
1