Filter
Top Products
E-27
English
Changing the RDS modes
When an RDS station is received, by pressing the FREQ
PS/PTY/RT/CT selector button once or more, you can
change the display mode among the RDS
modes employed
by the received station in the order shown below. (The RDS
mode not employed by the station cannot be selected.)
Notes
● If the received station is not an RDS station, pressing the
FREQ PS/PTY/RT/CT selector button displays “NO RDS”
on the display, and then it returns to the frequency display
mode.
● When an RDS station is received, the display is
automatically turned into the PS mode. Do not press the
FREQ PS/PTY/RT/CT selector button until the display is
turned into the PS mode. If the button is pressed before
the display mode changes, it may occur that “NO PS”
appears on the display. This is because the unit has not
received all of the RDS data on the station yet.
➀ Frequency display mode
The frequency of the station being received is
displayed.
➁ PS (Program Service name) mode
The name of the station being received is displayed
using characters selected from among 64 Roman
Alphabets including umlaut sign.
* If other characters are used on the PS data, they
are displayed with underbars.
* “PS WAIT” may flash while the unit is receiving the
data.
* If the station does not employ the PS data service,
“NO PS” lights up on the display for about 2
seconds and then returns to frequency display
mode.
➂ PTY (Program Type) mode
The type of the program on the station being received
is displayed. In this mode, you can make this unit
search for a station which is broadcasting a program
of your desired program type. For details, refer to the
next page.
* If the RDS station does not employ the PTY data
service, “NO PTY” lights up on the display for about
2 seconds and then returns to frequency display
mode. If the station has PS data, after that, it turns
into the PS mode.
➃ RT (Radio Text) mode
Information about the program on the station being
received is displayed. Information is displayed by a
maximum of 64 Roman Alphabets including umlaut
sign.
* If other characters are used on the RT data, they
are displayed with underbars.
“RT WAIT” may flash while the unit is receiving the
data.
* If the RDS station does not employ the RT data
service, “NO RT” lights up on the display for about 2
seconds and then returns to frequency display
mode. If the station has PS data, after that, it turns
into the PS mode.
➄ CT (Clock Time) mode
Current time is displayed in the following form. The
CT data from the station being received changes
every minute.
This unit corrects the time of the built-in clock by
synchronizing it with the CT data. (This function can
also be canceled, if so desired. Refer to page 29 for
details.)
* “CT WAIT” may flash while the unit is receiving the
data. If the data is accidentally cut off, “CT WAIT”
may flash and then turn into “NO CT”.
* If the RDS station does not employ the CT data
service, “NO CT” lights up on the display for about 2
seconds and then returns to frequency display
mode. If the station has PS data, after that, it turns
into the PS mode.
1 Frequency
display mode
2 PS mode
3 PTY mode
5 CT mode
4 RT mode
RANDOM
FREQ PS/PTY/RT/CT
CD CHANGER RECEIVER EMX
–
100RDS
PHONES
DISC
123
PROGRAM
MUSIC
USER
MEMORY
INPUT SELECTOR
VCR/LD-TV/CD/TUNER/TAPE•MD/AUX
VOLUME
RANDOM
DISPLAY
MIC
MIN MAX
MIC MIXING
REPEAT TIME MEMORY AUTO/MAN'L
HOUR
PRESET/TUNING/BAND
A/B/C/D/E
MIN TIME ADJ TIMER
OPEN/
CLOSE
DISC
CHANGE
STANDBY/ON
MODE PTY SEEK STARTFREQ PS/PTY/RT/CT
PTY SELECT PTY SELECT
FREQ PS/PTY/RT/CT
Hour Minute
RECEIVING RDS STATIONS