Filter
Top Products
E-8
SETTING UP THE SPEAKERS
40mm
1
2
Good No good
Tapping screw
(Available at the
hardware store)
Wall/ wall
support
Only for customers who use the YAMAHA
NS-P30 speaker system (separate
purchase)
If you use the YAMAHA NS-P30 speaker system with this
unit, read the following descriptions for mounting the NS-P30.
* “NS-P30” is the package number which includes the
YAMAHA speaker systems NX-E70 and NX-C70.
NX-E70 is designed to be used as a rear effect speaker
system, and NX-C70 is designed to be used as a center
speaker system.
■ Mounting the rear speakers (NX-E70)
Mount the rear speakers on a shelf, rack or on the floor
directly, or hang them on the wall.
To mount the rear speakers on a wall
1 Attach the provided mounting bracket to the rear of the
speaker by using the provided screws.
2 Fasten screws into a firm wall or wall support as shown in
the diagram, and hang the holes of the mounting bracket
on the protruding screws.
* The holes are arranged so that the speakers can be
mounted in a side long, upright or upside-down way.
* Make sure that the screws are caught by a narrow part
of the holes securely.
Notes
●
Never attach the bracket to the speaker conversely.
●
Speaker cords should be connected to the speaker’s
terminals after the bracket has attached to the speaker to
prevent the speaker cords pressed between the speaker
and the bracket.