E-40
HOW TO USE THE BUILT-IN TIMER
PHONES
POWER
DISC
123
PROGRAM
ECHO ECHO
MUSIC
USER
MEMORY
INPUT SELECTOR
VCR/LD-TV/VCD-CD/TUNER/TAPE•MD/AUX
VOLUME
RANDOM
DISPLAY
MIC
MIN MAX
MIC MIXING
REPEAT TIME MEMORY AUTO/MAN'L
HOUR
PRESET/TUNING/BAND
A/B/C/D/E
MIN TIME ADJ TIMER
OPEN/
CLOSE
DISC
CHANGE
VIDEO CD
Version 2.0
/
Playback Control
TIME
A
PROG
B C D
+I0
E
VCD/CD
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9 0
PRESET
INPUT
TIME INDEX
INTRO DIGEST
POWER
DISPLAY
SLEEP
MUSIC
FLAT
PROGRAM
USER
VOLUME
DISC SKIP
RETURN
PREV NEXT
SELECT
LEVEL
TEST
CENTER/REAR
/DELAY
ECHO/
KEY
OPEN/CLOSE
INDEXMODE
TUNER
SLEEP
POWER
POWER
Sleep timer operation
This unit can be turned into the standby mode automatically.
1 Play the desired sound source.
2 Press the SLEEP button. “SLEEP” appears on the display,
and soon it is replaced by “2h00m”.
3 Press the SLEEP button repeatedly until the desired sleep
time appears on the display.
The display will change as described below. [Time is
displayed by the hour (h) and the minute (m).]
* The original display mode will resume about 4 seconds
after the selection is made.
* The SLEEP indicator will light up to indicate that the
sleep timer is on.
4 The unit will be turned into the standby mode
automatically when the selected sleep time passes.
To confirm the sleep time setting
Press the SLEEP button once. “SLEEP” appears on the
display, and soon it is replaced by the remaining time of the
selected sleep time.
To change the sleep time
While the SLEEP indicator is illuminated, press the SLEEP
button repeatedly until the desired time appears.
To stop the sleep timer operation
Press the POWER switch, or press the SLEEP button
repeatedly until “OFF SLEEP” appears on the display.
(The SLEEP indicator will go out.)
Using the timer and the sleep
timer at the same time
1 Prepare timer play. (See page 38 and 39.)
* Do not turn this unit into the standby mode after the
timer setting is finished.
2 Press the SLEEP button and set the sleep time.
When the sleep timer operation finishes, the timer begins
functioning to turn the source on at the preset time.
Note
Do not make the timer time setting so that the timer will start
during sleep timer operation. (Since sleep timer operation
has priority, the timer will not operate.)
OFF SLEEP
(Sleep timer is off.)
2h00m 1h30m 1h00m 0h30m
↑
↑
↑
↑
↑