E-25
English
Normally, if station signals are strong and there is no
interference, quick automatic-search tuning (Automatic
tuning) is possible. However, if signals of the station you
want to select are weak, you must tune to it manually
(Manual tuning).
Automatic tuning
1 Select the tuner by turning the INPUT SELECTOR until
“TUNER” appears on the display.
2 Select the reception band (FM or AM) by pressing the
PRESET/TUNING/BAND button confirming it on the
display.
* Do not select a preset tuning mode (Do not select a
mode in which “PRESET” lights up on the display.)
3 Press the AUTO/MAN’L button so that “AUTO” appears
on the display.
(In this mode, stations are received in stereo or monaural
automatically.)
4 Press the button to tune to a higher frequency, or
press the button to tune to a lower frequency.
(When tuned in to a station, “TUNED” will light up on the
display.)
5 If the station where tuning search stopped is not the
desired one, follow step 4 again.
* If the tuning search does not stop at the desired station,
change to the Manual tuning method as described below.
* STEREO indicator will light up when an FM stereo
broadcast with sufficient signal strength is received.
Manual tuning
11 Follow steps 1 and 2 of the Automatic tuning method.
22 Press the AUTO/MAN’L button so that “AUTO”
disappears from the display.
(In this mode, stations are received in monaural.)
33 Press and hold the button to tune to a higher
frequency, or press and hold the button to tune to a
lower frequency.
Release it just before reaching the desired frequency,
and then press it repeatedly until the desired frequency
appears.
(When tuned in to a station, “TUNED” will light up on the
display.)
Note
If you tune in to an FM station manually, it is received in
monaural automatically to increase the signal quality.
Note
Pressing the TUNER input selector button on the remote
control transmitter switches the tuner from a normal tuning
mode to a preset tuning mode and vice versa, or from FM to
AM mode and vice versa.
TUNING OPERATION
PHONES
POWER
DISC
123
PROGRAM
ECHO ECHO
MUSIC
USER
MEMORY
INPUT SELECTOR
VCR/LD-TV/VCD-CD/TUNER/TAPE•MD/AUX
VOLUME
RANDOM
DISPLAY
MIC
MIN MAX
MIC MIXING
REPEAT TIME MEMORY AUTO/MAN'L
HOUR
PRESET/TUNING/BAND
A/B/C/D/E
MIN TIME ADJ TIMER
OPEN/
CLOSE
DISC
CHANGE
VIDEO CD
Version 2.0
/
Playback Control
TIME
A
PROG
B C D
+I0
E
VCD/CD
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9 0
PRESET
INPUT
TIME INDEX
INTRO DIGEST
POWER
DISPLAY
SLEEP
MUSIC
FLAT
PROGRAM
USER
VOLUME
DISC SKIP
RETURN
PREV NEXT
SELECT
LEVEL
TEST
CENTER/REAR
/DELAY
ECHO/
KEY
OPEN/CLOSE
INDEXMODE
TUNER
1
4, 33
1
2
3, 22