2
Introduction
Thank you for purchasing this unit. This Owner’s
Manual explains the basic operation of this unit.
The region code is 1
for U.S.A and Canada
models, 4 for the
Australia model.
Since it is usual for DVD movies to be released
at different times in different regions of the
world, all players have region codes and discs can
have an optional region code. This unit can play
discs containing the identical region code, or
mentioned as region “ALL”. If you load a disc of a
different region code to this unit, you will see the
region code notice on the screen. The disc will
not playback, and should be unloaded.
Environmental Information
This unit consists of materials which can be
recycled and reused if disassembled by a
specialised company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
Supplied accessories
– Remote control
– Batteries (two AA size) for remote control
– Audio/Video cable
– Owner’s Manual
Notes about Discs
– This unit is designed for use with DVD video,
Video CD, Super video CD, Audio CD (CD text
supported), CD-R and CD-RW (MP3 Supported),
DVD+RW and DVD+R.
– CD-R and CD-RW cannot be played unless
finalized.
– Only the first session of multisession discs is
supported.
– Some discs cannot be played depending on the
disc characteristics or recording conditions.
– Be sure to use only CD-R and CD-RW discs
made by reliable manufacturers.
– Do not use any non standard shaped discs
(heart, etc.)
– Do not use disc with tape, scals, or paste on it,
damage to the unit may result.
– Do not use a disc printed on its surface by a
commercially available label printer.
Cleaning Discs
● When a disc becomes dirty, clean it with a
cleaning cloth. Wipe the disc from the centre out.
Do not wipe in a circular motion.
● Do not use solvents such as benzine, thinner,
commercially available cleaners, or antistatic
spray intended for analog records.
Symbols Used in this Manual
The below symbols appear in some headings
and notes with the following meanings:
DVD
VCD
CD
– Description refers to playback of DVD-video
discs
– Description refers to playback of Video CDs
– Description refers to playback of Audio CDs
● Some DVD video discs require specific
functions or allow only limited functions
during playback.
● “ Ä“ may appears on the video monitor
which means that the function is not
available on that specific DVD video disc.
1 4