Filter
Top Products
9
English
5 MAIN LEVEL switch <U.K. and Europe models only>
Normally set to “0 dB”. If desired, you can decrease the output
level at the MAIN OUTPUT terminals by 10 dB by setting this
switch to “–10 dB”.
6 AC OUTLET (UNSWITCHED)
The power cord of any audio/video unit can be connected to
this outlet.
The power to this outlet is not controlled by this unit’s POWER
switch. This outlet will supply power to the connected unit even
if this unit is turned off.
The maximum power that can be connected to this outlet is
100 watts.
7 AC power cord
After all connections are completed, connect this into a wall AC
outlet.
8 AUDIO SIGNAL connection terminals (for audio source
equipment)
Connect the inputs and/or outputs of your audio equipment.
9 AUDIO/VIDEO SIGNAL connection terminals (for video
source equipment)
Connect the audio and video inputs and/or outputs of your
video equipment.
0 REAR SPEAKERS terminals
When using the built-in rear-channel amplifier, connect the rear
speakers here.
A CENTER SPEAKERS terminals
When using the built-in center-channel amplifier, connect one
or two center speakers here.
B REAR (SURROUND) OUTPUT terminals
These terminals are for rear channel line output. There is no
connection to these terminals when you use the built-in
amplifier.
However, if you drive rear speakers with an external stereo
power amplifier, connect the input terminals of the external
amplifier (MAIN IN or AUX terminals of a power amplifier or an
integrated amplifier) to these terminals.
Note
Output level of signals from the MAIN, REAR, CENTER and
SUBWOOFER OUTPUT terminals are adjusted by the use of
VOLUME control on the front panel or VOLUME keys on the
remote control transmitter.
C CENTER OUTPUT terminals
These terminals are for center channel line output. There is no
connection to these terminals when you use the built-in
amplifier.
However, if you drive a center speaker with an external power
amplifier, connect the input terminal of the external amplifier
driving a center speaker to one of these terminals.
If you drive two center speakers with external amplifiers,
connect the input terminal of the external amplifier driving
another center speaker to the other terminal.
D SUBWOOFER OUTPUT terminals
You may wish to add a subwoofer to reinforce the bass
frequencies.
These terminals are line level outputs for connecting with the
amplifier(s) driving subwoofer(s).
When the input signals to this unit are in normal 2-channel
stereo, these terminals output only frequencies below 150 Hz
(200 Hz for General model only) from the main and center
channels. When signals decoded with the Dolby Digital (AC-3)
are input to this unit and are selected as the input source,
these terminals output signals from the subwoofer channel.