Filter
Top Products
12
Red: positive (+)
Black: negative (–)
➀
Unscrew the knob.
➁
Insert the bare wire.
[Remove approx. 5mm
(1/4”) insulation from
the speaker wires.]
➂
Tighten the knob and
secure the wire.
<General model only>
Banana Plug connections are also possible. Simply insert the
Banana Plug connector into the corresponding terminal.
1
2
3
How to Connect to the REAR and CENTER SPEAKERS terminals
Connect the SPEAKERS terminals to your speakers with wire of the proper gauge, cut as short as possible. If the connections are
faulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct, that is the + and –
markings are observed. If these wires are reversed, the sound will be unnatural and lack bass.
Caution
Do not let the bare speaker wires touch each other and do not let them touch any metal part of this unit. This could damage
this unit and/or speakers.
Note
Use speakers with the specified impedance shown on the rear of this unit.
CONNECTING SPEAKERS
MAIN
SPEAKERSOUTPUT OUTPUT
l0 dB 0 dB
l
MAIN
LEVEL
SINGLE
:
8ΩMIN./SPEAKER
DUAL
:4ΩMIN./SPEAKER
8ΩMIN./SPEAKER
CENTER
REAR
SINGLE
:
4ΩMIN./SPEAKER
DUAL
:2ΩMIN./SPEAKER
6ΩMIN./SPEAKER
CENTER
REAR
IMPEDANCE SELECTOR
REAR CENTER
SUB
WOOFER
DUAL
(SURROUND)
DUAL
CAUTION
SEE INSTRUCTION MANUAL FOR CORRECT SETTING.
DUAL DUAL
SINGLE
REAR
CENTER
Amplifier
(for driving main speakers)
Center speakerRear speakers
Main speakers
Subwoofer system
(Europe model)
Left Right
LeftRight