Filter
Top Products
PREPARATIONS ➤ Connecting the power cable En 39
Connecting a device compatible with the trigger function
The trigger function can control an external device in conjunction with operating the
unit (such as powering on/off and input selection). If you have a power amplifier or a
Yamaha subwoofer that supports a system connection or a device with a trigger input
jack, you can use the trigger function by connecting the external device to one of the
TRIGGER OUT jacks.
• You can configure the trigger function settings in “Trigger Output1” and “Trigger Output2” (p.120) in the
“Setup” menu.
After all the connections are complete, connect the supplied power cable to the unit
and then to an AC wall outlet.
TRIGGER
OUT
1
2
12V 0.1A
The unit (rear)
TRIGGER OUT
1–2 jacks
System
connection
input
Yamaha
subwoofer
Power amplifier
(such as
Yamaha MX-A5000)
Trigger In
(+12V)
8 Connecting the power cable
To an AC wall outlet
The unit (rear)
1 2 3 4 5 6 7 8 9 10