Filter
Top Products
CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 104
Setup menu items
Menu Item Function Page
Speaker
Auto Setup Automatically optimizes the speaker settings (YPAO). 41
Manual Setup
Setting Pattern Registers two speaker setting patterns and switches between them. 106
Setting Data Copy Copies the “Setting Pattern” parameters in the specified direction. 106
Configuration
Front Selects the size of the front speakers. 106
Center Selects whether or not a center speaker is connected and its size. 106
Surround Selects whether or not surround speakers are connected and their size. 107
Surround Back Selects whether or not surround back speakers are connected and their size. 107
Front Presence Selects whether or not front presence speakers are connected. 107
Rear Presence Selects whether or not rear presence speakers are connected. 107
Subwoofer 1
Subwoofer 2
Selects whether or not a subwoofer is connected to the SUBWOOFER 1 or SUBWOOFER 2 jack and its phase. 107
SWFR Layout Selects a subwoofer layout when 2 subwoofers are used. 108
Extra Bass Sets the speakers to produce the front channel low-frequency components. 108
Distance Sets the distance between each speaker and listening position. 108
Level Adjusts the volume of each speaker. 108
Parametric EQ Adjusts the tone with an equalizer. 108
Test Tone Enables/disables the test tone output. 109
Sound
Lipsync
Delay Enable Enables/disables the Lipsync adjustment for each input source. 109
Auto/Manual Select Selects the method to adjust the delay between video and audio output. 109
Adjustment Adjusts the delay between video and audio output manually. 110
Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. 110
Max Volume Sets the maximum volume to prevent excessive loudness. 110
Initial Volume Sets the initial volume for when this receiver is turned on. 110
Pure Direct Mode Selects whether to output video signals during the Pure Direct mode. 110
Adaptive DSP Level Selects whether to automatically adjust the CINEMA DSP effect level. 110
VPS Selects whether to create Virtual Presence Speaker (VPS) using the front, center, and surround speakers. 111
DAC Digital Filter Selects the digital filter type of the audio DAC (digital-to-analog converter). 111
Video
Analog to Analog Conversion Enables/disables the video conversion between the analog video jacks 111
Video Mode Enables/disables the video signal processing (resolution, aspect ratio and video adjustments). 111