Filter
Top Products
CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 105
HDMI
HDMI Control Enables/disables HDMI Control. You can also configure the relevant settings (such as ARC and TV audio input). 113
Audio Output Selects a device to output audio. 114
Standby Through Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode. 114
Network
IP Address Configures the network parameters (such as IP address). 115
Network Standby Selects whether to enable/disable the function that turns on the unit from other network devices. 115
MAC Address Filter Sets the MAC address filter to limit access to the unit from other network devices. 115
Network Name Edits the network name (the unit’s name on the network) displayed on other network devices. 116
Multi Zone
Main Zone Set Zone Rename Changes the zone name (for main zone) displayed on the front display or TV screen. 116
Zone2 Set
Zone3 Set
Volume Enables/disables volume adjustments for Zone2 or Zone3 output. 117
Max Volume Sets the Zone2 or Zone3 maximum volume to prevent excessive loudness in the second zone. 117
Initial Volume Sets the Zone2 or Zone3 initial volume for when the unit is turned on. 117
Mono Switches between stereo and monaural for Zone2 or Zone3 output. 117
Zone Scene Rename Changes the scene names (for Zone2 or Zone3) displayed on the front display or TV screen. 117
Zone Rename Changes the zone name (for Zone2 or Zone3) displayed on the front display or TV screen. 117
Zone4 Set
Zone Scene Rename Changes the scene names (for Zone4) displayed on the front display or TV screen. 118
Zone Rename Changes the zone name (for Zone4) displayed on the front display or TV screen. 118
Monitor Out Assign Select the zone for which the MONITOR OUT/ZONE OUT jacks are used. 118
HDMI OUT2 Assign Select the zone for which the HDMI OUT 2 (ZONE OUT) jack is used. 118
Party Mode Set Enables/disables switching to the party mode for each zone. 118
Function
Input Assignment Assigns the COMPONENT VIDEO, COAXIAL and OPTICAL jacks to another input source. 119
Display Set
Dimmer (Front Display) Adjusts the brightness of the front display. 119
Short Message Selects whether to display short messages on the TV screen when the unit is operated. 119
Wallpaper Selects the image to be used as wallpaper on the TV. 119
Trigger Output1
Trigger Output2
Trigger Mode Specifies the condition for the TRIGGER OUT jack to function. 120
Target Zone Specifies the zone with which the TRIGGER OUT jack functions are synchronized. 120
DC OUT Power Mode Selects how to supply power through the DC OUT jack. 120
Memory Guard Prevents accidental changes to the settings. 121
ECO Auto Power Standby Sets the amount of time for the auto-standby function. 121
Language Select an on-screen menu language. 122
Menu Item Function Page