Filter
Top Products
PREPARATIONS ➤ Connecting the power amplifier and subwoofers En 25
■ Unbalanced connection
Depending on the speaker system you want to use, connect the corresponding PRE
OUT (RCA) jacks of the unit to the amplifier with audio pin cables (RCA unbalanced
cables).
• We recommend using a power amplifier with volume control bypass (or without volume control circuit).
Connecting subwoofers
Connect the subwoofers (with built-in amplifier) to the SUBWOOFER PREOUT 1–2 jacks
of the unit with audio pin cables (RCA unbalanced cables).
• Only unbalanced connections are available for subwoofers.
• You can connect 2 subwoofers to the unit and place them on the right/left (or front/rear) sides of the room.
When using 2 subwoofers, configure the “SWFR Layout” setting (p.108) in the “Setup” menu after
connecting the power cable to an AC wall outlet.
The unit (rear)
Main input
(RCA)
Power amplifier
Speaker
connections
PRE OUT
(RCA) jacks
99
The unit (rear)
1 2 3 4 5 6 7 8 9 10