7
Front and Rear of Unit
The CRW2200E drive’s front panel features the following:
➀
➀➀
➀ Disc tray
The tray is used to hold the disc. It slides out from the drive unit when a disc needs to be
loaded or unloaded. (
→
P. 28)
➁
➁➁
➁ Manual Eject hole
Only use this if no other method is available for unloading a disc. (
→
P. 29)
➂
➂➂
➂ Eject button
Press this button when you need to open or close the tray. Remove the disc after the tray
has opened. (
→
P. 28)
➃
➃➃
➃ Headphone jack
You can connect stereo headphones to this stereo mini jack and listen to an audio CD
loaded in the drive.
➄
➄➄
➄ Headphone volume control
Adjust this control to set a suitable volume level when listening to an audio CD using the
headphone jack. Slide the knob to the left to decrease the volume and to the right to
increase it.
➅
➅➅
➅ LED
Indicates the operation status of the
CRW2200E
drive. (
→
P. 37)
Front Panel
➃ ➄
➅
➁ ➂➀