Filter
Top Products
Does your Maintosh have a
built-in SCSI connector?
STEP
1
Obtain a SCSI adapter card
Recommended models:
Adaptec PowerDomain 293OU (PCI)
STEP
1-1
Set up the CRW2100SXZ drive
1. Set the switches t the rear of the drive
(Pages 10-11).
2. conect the SCSI and power cables,
then switch the drive on (Page 16).
STEP
2
Install the SCSI adapter card
Read this manual and insert the
SCSI card into the appropriate
PCI slot on the computer.
STEP
1-2
NO
YES
Check that the CRW2100SXZ
drive is recognized correctly
Use the Aple System Profiler and check
that the drive is recognized correctly.
STEP
3
Install the CD writing
software
For details about how to install the
software, refer to the documentation
that came with it.
STEP
4
Start using the CRW2100SXZ
drive!
Use the drive to create audio CDs, to
back up data on your hard disk, or for
whatever purpose suits your needs.
STEP
5
Macintosh Users
8