Yamaha CRW2100FXZ CD Player User Manual


 
3. SCSI MODEL HARDWARE INSTALLATION
3.1. Setup Flowchart for CRW2100SXZ (SCSI)
This flowchart shows the procedure for setting up your new Yamaha 3-in-1 SCSI drive. For
easy cross-referencing, the relevant pages in this manual are also provided.
Do you have a SCSI
adapter card?
STEP
1
Obtain a SCSI adapter card
Recommended models:
Adaptec AHA-2940-series (PCI)
Iwill 2930 series (PCI)
STEP
1-1
Check that the SCSI adapter
card is correctly installed
Go to Control Panel | System | Device
Manager tab. Double-click on SCSI
controllers to check that the adapter
cardis recognized correctly by the
computer’s OS.
STEP
2
Install the SCSI adapter card
Read this manual and insert the SCSI
card into the appropriate slot on
the computer.
STEP
1-2
NO
YES
Set up the CRW2100SXZ drive
1. Set the switches at the rear of the drive
(Pages 10 & 11)
2. Connect the SCSI and power cabls,
then switch the dirve on (P.16-18).
STEP
3
Check that the CRW2100SXZ drive
is recognized correctly (p.18)
Go to Control Panel | System | Device
Manager tab. Double-click on CDROM to
check that the drive is recognized
correctly by the computer’ OS.
STEP
4
Install the CD writing software
For details about how to install the
software, refer to the documentation
that came with it.
STEP
5
Start using the CRW2100SXZ
drive!
Use the drive to create audio CDs, to
back up data on your hard disk, or for
whatever purpose suits your needs.
STEP
6
7
IBM Compatible or
Macintosh Computers
Windows Users