Filter
Top Products
Setup Procedures
11
● As an additional drive (set as secondary slave)
If the casing of your computer has a spare 5.25-inch drive
bay available, such as with many tower-type designs, you
can install the CRW2100E drive in addition to the
computer’s existing CD-ROM drive.
CRW2100E
● As a replacement drive (set as secondary master)
If the casing of your computer does not have a spare 5.25-
inch drive bay available, such as with many desktop-type
designs, you can replace the computer’s existing CD-ROM
drive with the CRW2100E drive.
CD-ROM drive
CR
CR
W2100E
W2100E
CRW2100E
n You cannot replace the computer’s existing CD-ROM drive
with the CRW2100E drive using the existing cable if the drive
is a SCSI type. In this case, use an IDE cable to connect the
CRW2100E drive.
Additional DriveReplacing Drive
Choosing the Connecting Method
4 First make sure how existing IDE devices are connected to your
computer, and then determine how to connect the CRW2100E drive in
conjunction with those devices.