Filter
Top Products
Setup Procedures
10
Connecting the CRW2100E Drive
Opening the Computer
1 Power down your computer and unplug it from the AC outlet.
If you proceed without doing this, you run
the risk of receiving an electric shock and/
or short-circuiting and damaging
components, including the CRW2100E
drive.
2 Remove the outer casing of the computer. If you need to remove screws
in the process, make sure you don’t lose them.
n The method for removing the casing and
fitting the drive in the drive bay can vary
depending on the manufacturer. Refer to the
documentation that came with your computer
for further details.
3 Touch a metal part of the computer’s chassis or power supply unit to
drain any static charge that may have built up inside your body.
Alternatively, you can wear an anti-static grounding (earthing) wrist
strap.
You can permanently damage
equipment if you touch it while there
is any static charge in your body.