XM Satellite Radio Satellite Radio Digital Audio Player Satellite Radio User Manual


 
50
Personalizing Your SKYFi
3
51
Using SKYFi
3
and Your PC
Erase Memory
To erase all internal memory on your SKYFi
3
:
1. Press the Menu button, scroll to “Settings” and press the Play/Pause
button to select it.
2. Scroll to “Setup” and press the Play/Pause button to select it.
3. Scroll to “Erase Memory” and press the Play/Pause button to select it.
4. Scroll to the desired device to format and press the Play/Pause button to
select it.
Resetting Factory Defaults
You can return your SKYFi
3
to the state it was shipped from the factory.
Be careful: this will erase all settings, including Stock Ticker, Info Extras,
presets, display options, and audio options.
1. Press the Menu button, scroll to “Settings” and press the Play/Pause
button to select it.
2. Scroll to “Setup” and press the Play/Pause button to select it.
3. Scroll to “Set Defaults” and press the Play/Pause button to select it.
4. Select “Restore Setting Only” to restore to factory settings. Select “Re-
store and Erase” to restore settings and erase stored information. Press
the Play/Pause button to confirm your selection.
Caution: Depending on your selection, ALL stored XM content and digital
audio files on your SKYFi
3
and/or MicroSD card will be erased.
Using SKYFi
3
and Your PC
System Requirements
In order to use XM+Napster and the Firmware Update Tool, the minimum
system requirements are:
Intel® Pentium®-class CPU
Microsoft® Windows® XP Home SP2, Windows XP Professional SP2, or
Windows 2000 SP4 operating system*
At least 64 MB of RAM
At least 13 MB of available hard disk space for XM+Napster application
Internet Explorer 5.1 or higher
Windows Media® Player 9 or higher; Windows Media Player 10 recom-
mended for Windows XP
Active Internet connection; we recommend a broadband (cable, DSL, or
fiber) connection for optimal performance
You may use your SKYFi
3
with a Macintosh® computer equipped with a
USB port, however, you will not be able to use XM+Napster to organize
your audio files. You will be able to copy files to your SKYFi
3
directly from
the Macintosh Finder. The instructions that follow are for XM+Napster
users.
* Delphi currently does not support the following operating systems: Windows 95, Windows 98, Windows NT,
Windows Me
Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United
States and other countries. Microsoft, Windows and Windows Media are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries. Macintosh is a trademark of
Apple Computer, Inc., registered in the U.S. and other countries.