Filter
Top Products
22
Updating SKYFi
3
Firmware
23
Updating SKYFi
3
Firmware
Updating SKYFi
3
Firmware
You can check for firmware updates at any time by plugging your device
into your computer and going to http://FWUPDT.xmradio.com. You can also
link to this page by clicking the “XM Firmware Update Client” button on the
CD’s XM+Napster menu. Download the Firmware Update Tool to your PC
Desktop for easy access, then double-click the icon to run the tool. Follow
the onscreen instructions to download the latest firmware to your device.
While you’re running XM+Napster, connect your device to your PC and
XM+Napster will automatically show if a firmware update is available for
your device. If an update is available, follow the onscreen prompts to
download the latest firmware to your device.
NOTE: On the “Install XM+Napster” section of the CD, click on the “XM
Firmware Update Client” button to link to the Firmware Update Tool.
Caution: Please make sure your battery is at least 80% full before updating your firmware.