Filter
Top Products
Defeat Subwoofer’s Low Pass Crossover Filter
In rare cases you may want to permanently defeat the subwoofer’s low pass crossover. For example, if you have not performed Auto-EQ
PLUS
,
t
he subwoofer’s input from the receiver is limited by the receiver’s internal crossover to the bass frequencies, or you simply would rather not
use the subwoofer’s crossover filter. To defeat the low pass crossover:
1. Navigate to the
System Settings screen.
2
. Move the cursor down to
L
OW PASS XOVER FREQ
a
nd push
S
ELECT
.
3. Press
RESET.
4
. The screen shown in Figure 20 appears.
5. Exit and save per the Save Settings instruction above.
Figure 20: System Settings Screen Defeating Subwoofer’s Low Pass Crossover Filter
[ 36 ]
D
igital Drive
P
LUS
U
ser Interface Manual
TV SCREEN USER INTERFACE FOR OPTIMIZATION