Filter
Top Products
REMOTE CONTROL BUTTON COMMANDS
F
ollowing are commands and their remote control button sequences. Unless otherwise noted, these sequences work only on the
Introductory screen.
Remote Control Button Sequence Commands for TV-based Interface
C
ommand Button Sequence Description
G
o to
S
ystem Response
s
creen 1 – 2 – 3 – 4 – 5 On the
I
ntroductory
s
creen
Self-EQ 3 – 2 – 1 Initiate Self-EQ optimization. Be sure to connect the
microphone before engaging. After 28 sweeps,
the unit saves and resets.
Cancel Self-EQ and Auto-EQ
PLUS
RESET Stop and cancel a Self-EQ or Auto-EQ
PLUS
optimization process.
Restore defaults 8 – 9 – 0 Restore defaults and reset the subwoofer.
Restore last saved volume RESET If volume is changed, restores last saved volume.
Display serial number
▲ - ▲ - ▲ - ▲ - SELECT Shows the serial number of the unit at the top
of the screen.
Switch PAL/SECAM video
▼ - ▼ - ▼ - ▼ - RESET The unit restarts in PAL/SECAM video mode.
Use 8 -9- 0 (Restore defaults) to return to
NTSC mode.
Go to the System Response Screen
To get to the System Response screen:
1. With the
Introductory screen showing on the TV, press 1-2-3-4-5 on the Digital Drive
PLUS
remote. As you press these buttons, the
numbers display on the
Introductory screen as shown in Figure 5.
Figure 5: Introductory Screen
[ 25 ]
D
igital Drive
P
LUS
U
ser Interface Manual
TV SCREEN USER INTERFACE FOR OPTIMIZATION