Filter
Top Products
Make & Save Preset Changes
The simplest customization of parameters you can do is to make and save changes to the presets.
Y
ou can modify the preset parameters on the
S
ystem Settings
s
creen.
See the
Digital Drive
P
LUS
User’s Manual for a detailed explanation of the preset parameter settings that you can modify.
1) Go to the System Settings screen.
2
) Use the remote keys to make changes to the presets as shown in Figure 11.
3) Press TEST to review the curve with these settings active. Be sure to have the mic connected and the Sweep Tone CD playing first.
Figure 11: System Settings Screen Change Preset Low Pass Crossover Frequency
Change Default Preset
The Default preset is invoked when the subwoofer powers on. The factory setting is preset 3 for the Default preset. To change the
default preset:
1. Use the
▲, ▼, and remote keys to select the current value for the DEFAULT PRESET as shown in Figure 12.
Figure 12: System Settings Screen Change Default Preset
[ 29 ]
D
igital Drive
P
LUS
U
ser Interface Manual
TV SCREEN USER INTERFACE FOR OPTIMIZATION
▲
▲