Turbosound TCS-C50T Speaker User Manual


 
user manual
TCS Compact series
TCS-C50T manual
page 17
Technical Specifications
Model TCS-C50T
Dimensions
HxWxD
268mm (10.5”) dia x 83mm (3.3”) deep excl back box
268mm (10.5”) dia x 219mm (8.6”) deep incl back box
Net Weight
3.4kg (7.5lbs)
Components
1 x 5” (127mm) LF driver, 1 x 1” (25mm) HF tweeter
Frequency Response ±4dB
75Hz - 22kHz
Nominal Dispersion
180ºH x 180ºV @-6dB points
Power Handling
75 watts r.m.s., 150 watts program
Sensitivity
1 watt @ 1 metre
92dB (half space), 90 dB (full space)
Maximum SPL continuous->
peak->
110dB
116dB
Line transformer taps
60 watts, 30 watts, 15 watts (100 volt line)
60 watts, 30 watts, 15 watts, 7.5 watts (70 volt line)
Impedance
16 ohms nominal
Construction
Paintable injection moulded ABS plastic
Grille
Powder coated perforated steel
Connectors
Phoenix 4-way connector for input and link
Protection
Thermal fuse disconnects speaker from distributed system
Standards
Conforms to BS5839 part 8 1988 and IEC/EN 60849 fire prevention
Options
Without back can (TCS-C50TS)
without back can or transformer (TCS-C50S)
Notes:
1. Frequency response is measured on axis
2. Nominal Dispersion and sensitivity are an average over stated bandwidth
3. Maximum continuous SPL is measured by using unweighted diode-clipped pink noise in a half space
environment.
4. Maximum peak SPL is verified by subjective listening tests of familiar program material, before the
onset of perceived signal degradation
NB: Due to continuing product improvement these specifications are subject to change.