Filter
Top Products
user manual
TCS Compact series
TCS-C50T manual
page 11
5. Plug the connector into the socket in the loudspeaker’s terminal cup. The connector
is polarised to avoid the possibility of mis-connection.
6. The terminal cover also acts as the strain relief. Rotate the cover clockwise and
tighten the retaining screw.
7. Attach the safety lanyard to a separate support point. Consult construction codes in
your region.
8. Insert the speaker, together with the tile grid and tile, into the ceiling and allow its
weight to settle down onto the grid.
9. Adjust the voltage tap selector for desired level. The selector is located on the front
baffle, and should be adjusted before fitting the grille. In some installations it may
be preferable to leave grilles off until final adjustment of the tap selectors has been
completed for all loudspeakers.
10. Fit the loudspeaker grille. Orientate the grille such that the logo is facing in the
desired direction, and press the grille firmly into place until it is flush with the rim.