Turbosound TCS-C50T Speaker User Manual


 
user manual
TCS Compact series
TCS-C50T manual
page 12
Painting the Loudspeaker
Painting before Installation
The speaker’s white finish matches most décor schemes and does not need further
finishing. However where interior design requires an alternative colour this can be easily
accomplished. The speaker can either be painted before installation, or where the rim
needs to be finished at the same time as the ceiling, the rim can be painted after locating
in the ceiling.
The speaker will accept almost any type of emulsion or oil-based paint. Two coats are
recommended.
Clean the rim and grille with a light solvent such as white spirit. Do not use gasoline,
kerosene, acetone, MEK, paint thinner, harsh detergents or other chemicals, all of which
may damage the loudspeaker.
After cleaning, apply two coats of paint, using a roller or brush, or by spraying.
Painting the Speaker with the Ceiling
Using the paint shield provided, paint the speaker and remove the shield. To paint the
grille, first remove the logo and grille cloth backing. It is advisable to spray the grille to
avoid the mesh becoming clogged with paint from a roller or brush, which may impair
the sound quality. Replace the grille cloth.