Filter
Top Products
TL-R402M Cable/DSL Router User Guide
29
¾ Internal Port - Internal port, which the router opened for local host
¾ IP Address - The UPnP device that is currently accessing the router
¾ Status - Either Enabled or Disabled, “Enabled” means that port is still active, otherwise, the
port is inactive
Click Refresh to update the Current UPnP Settings List.
4.7 Security
Figure 4-19 The Security menu
There are six submenus under the Security menu (shown in Figure 4-19): Firew
all, IP Address
Filtering, Domain Filtering, MAC Filtering, Remote Management and Ping from WAN. Click
any of them, and you will be able to configure the corresponding function. The detailed
explanations for each submenu are provided below.
4.7.1 Firewall
Using the Firewall page (shown in Figure 4-20), you can turn the general firewall switch on or off.
The default setting for the switch is off. If the general firewall switch is off, even if IP Address
Filtering, DNS Filtering and MAC Filtering are enabled, their settings are ineffective.
- Security
y Firewall
y IP Address Filtering
y Domain Filter