Filter
Top Products
TL-R402M Cable/DSL Router User Guide
10
If you Choose "Static IP", the Static IP settings page will appear, shown in Figure 3-8:
Figure 3-8 Quick Setup - Static IP
¾ IP Address - This is the WAN IP address as seen by external users on the Internet (including
your ISP). Enter the IP address into the field
¾ Subnet Mask - The Subnet Mask is used for the WAN IP address, it is usually 255.255.255.0
¾ Default Gateway - Enter the gateway into the box if required
¾ Primary DNS - Enter the DNS Server IP address into the boxes if required
¾ Secondary DNS - If your ISP provides another DNS server, enter it into this field
)
Note:
The IP parameters should have been provided by your ISP.
Click the Next button, then you will see the Finish page:
Figure 3-9 Quick Setup - Finish
After finishing all configurations of basic network parameters, please click Finish button to exit
this Quick Setup.