Filter
Top Products
TL-R402M Cable/DSL Router User Guide
28
using the DHCP function. You can set up DMZ host on this page shown in Figure 4-17:
Figure 4-17 DMZ
To assign a computer or server to be a DMZ server:
1. Click the Enable radio button
2. Enter the local host IP address in the DMZ Host IP Address field
3. Click the Save button.
)
Note:
After you set the DMZ host, the firewall related to the host will not work.
4.6.4 UPnP
The Universal Plug and Play (UPnP) feature allows the devices, such as Internet computers, to
access the local host resources or devices as needed. UPnP devices can be automatically
discovered by the UPnP service application on the LAN. You can configure UPnP on this page
shown in Figure 4-18:
Figure 4-18 UPnP Settings
¾ Enable UPnP - UPnP can be enabled or disabled by clicking the Enable or Disable button.
As allowing this may present a risk to security, this feature is disabled by default
¾ Current UPnP Settings Table - this table displays the current UPnP information
¾ App Description - The description provided by the application in the UPnP request
¾ External Port - External port, which the router opened for the application
¾ Protocol - Which type of protocol is opened