Filter
Top Products
Open the battery cover on
the back of the remote
control.
Insert two 1.5V
AA batteries.
paying attention to the correct
polarities
(+
and -).
Replace the battery cover.
Insert Remote Batteries
Follow these precautions to avoid leaking
or cracking cells:
• Place batteries in the remote control so they
match the polarity.(+) to (+)and (-)to (-).
• Use the correct type of batieries.
Batteries
that look similar may differ in voltage.
• Always replace both batteries at the same
time.
• Do not expose batteries to heat or flame.
Range of
Operation of the
Remote Control
The remote control can be used up to
approximately 23 feeV7
meters in a straight
line. It can also be operated at a horizontal
angle of up to 300 from the remote control
sensor.
0
Before Using the DVD Player
Your DVD player is capable of playing DVD, VCD, and CD discs
User instructions may vary depending on the type of disc. Read the instructions carefully before use.
0 TV Broadcast System
• This device
is designed
to work with the NTSC video format.
• To change the TV broadcast system to be output, press the ZOOM button while the
power is turned off
.
The selection will switch between
NTSC
and PAL each time
you press
the button.
• For normal playback
,
the video format a DVD disc is recorded in must coincide
with your TV
's video format.
0 About the
a
symbol
display
• "
6
" may appear
on the TV
screen during operation.
This icon
means the function explained in this owner
'
s manual is not available on
that specific
DVD video disc.
7
fRCIf'
• When the power is not turned on, press down the STOP (
■
) button on the main unit for
over 5 seconds.
The product will be initialized to its optimum state.
• Some operational features such as the Speaker mode, Test tone, Volume, etc. will not
be displayed on the TV screen.