Filter
Top Products
6
1
11
1
Unpacking and Placement
The CD1 is packaged for maximum protection. Please carefully read the
instructions below before proceeding to unpack the unit. Be extremely careful.
Unpacking
Procedure
Inspect both ends of the cardboard box and open at the end without the
central staple by slitting the reinforced tape at either side.
Fold back the flaps and tip the package on end and the inner box will
slide out.
Lay the inner box down flat and upright, open it conventionally by
separating the top tray from the bottom.
The product can now be removed from the bottom packaging. This will
be easier if you have someone to help you by holding the base of the
box.
Alternately, the bottom tray and player could be tipped upside down
and the bottom packaging removed. If opened in this manner, please
ensure that you turn the contents over again.
Note:
Be very careful to secure the unit if you are planning to flip the package
upside down.
Remove the two white polystyrene protectors off either side of the
player, leaving the black material covering.
Pull back the material and remove the protective black tissue from the
front panel.
The player is now unpacked and ready for further installation.
Note:
Please retain all packaging material for future transport.
Box
Contents
1 x CD1 Compact disc player
1 x CD1 Product manual
1 x Perreaux remote control
2 x AAA batteries
1 x Screwdriver
1 x Detachable AC power cord
Placing
Your CD1
The CD1 should generally be placed close
to your amplifier, keeping the
interconnect cabling short.