Filter
Top Products
12
AC Mains Input and Fuse
AC Mains Input
An IEC-standard mains input is p
rovided at the rear of the unit. The AC cord set
is removable, allowing you to upgrade to a cord set of your preference.
Caution!
Prior to connection to the AC mains, please check the voltage label on
the rear panel to ensure that your unit conforms to t
he power supply in
your area. Never attempt to connect the unit to the incorrect voltage.
Severe damage can result from applying incorrect voltage to the unit.
Mains Fuse
The CD1 is equipped with a user serviceable AC mains fuse. In the event of
fuse fa
ilure, always replace with the same type and value fuse. Remember, fuses
do not usually blow without a reason. Any doubts about fuse failure should be
conveyed directly to your Perreaux dealer.
For more information on fuse ratings, please refer to Chapte
r 13
“Specifications”.
Caution!
This is the ONLY user accessible fuse.
Never replace the fuses with any other ratings other than the one
specified on the rear panel.
Always ensure your CD1 is disconnected from the mains supply before
attempting to change the mains fuse.
Power Switch
Depress this switch to the right (I
) to turn power ON. Depress this switch to the
left (O) to turn the CD1 off at which time the outputs will be disconnected.