Filter
Top Products
13
5
55
5
Remote Control Functions
The CD1 comes supplied with a 36 b
utton Perreaux Universal infrared remote
control.
The remote control uses 2 x AAA batteries and may be changed by removing the
black perspex insert.
Note:
Press the button on the remote to select the code-
set required to
control the CD1.
The CD1 uses the following functions:
Open/Close
When the disc drawer is closed, pressing this button
opens the drawer. To close
the drawer, press the button again.
When the drawer is open, the display reads ‘OPEN’. When it is closed with no
disc, the display
reads ‘NO DISC’. When the drawer closes with a disc inserted,
the display will show the number of tracks and the total time of the disc.
Program
Pressing this button
allows you to memorise as many as 20 tracks on the current
disc for playback in a spec
ific order. For example, you could instruct the CD1
to play track 6, followed by track 10, followed by track 2.
To begin a program:
Insert a disc and close the drawer. The CD1 will read the
contents of the disc.
Press the PROG button on the remote control. The
PROGRAM indicator will show on the display, along with
‘P:00’ indicating that the unit is waiting for the first track to
be memorised.
Enter the first track number using the DIRECT ACCESS
buttons. Your selection will be memorised automatically and
the display will change to ‘P:01’, indicating that one track has
been memorised. Continue entering the rest of your
selections using the DIRECT ACCESS buttons.
Note:
There is no need to press the PROG button, as each selection is
memorised as it is entered.
Once you have memorised a play list, the CD1 remains in PROGRAM mode
until the disc drawer is opened or the STOP button is pressed twice in
succession. If you press the PLAY button, the memorised program will play
instead of the entire disc, starting with the first selection in the memorised list.