Tekkeon ET2000 Headphones User Manual


 
10
Adjusting the Volume
The volume can be adjusted using the volume controls on ezTalker mini or
your mobile phone.
To Increase the Volume
1. Press and release the top VOLUME button +.
To Decrease the Volume
1. Press and release the bottom VOLUME button
-
.
Muting ezTalker mini
You can mute and un-mute the microphone temporarily so that you cannot be heard by the
connected party.
To Mute the Headset
1. With a call connected to the headset, press and hold both the Volume + and Volume
-
buttons
simultaneously until you hear a soft beep followed by a high-pitched beep (approximately 3
seconds).
To Un-Mute the Headset
1. When the microphone is muted, press and hold both the Volume + and Volume
-
buttons
simultaneously until you hear a soft beep followed by a high-pitched beep (approximately 3
seconds).
Figure 4.
Volume buttons
UG_et2000_v1.2_r1 10/21/05 11:05 AM Page 10