Filter
Top Products
53
FM/AM Tuner
Cannot listen to any station, or signal is too
weak.
e Tune in the station properly.
e Rotate the FM or AM antenna for the best
reception position.
e An external antenna is recommended.
Though the broadcast is stereo, it sounds
monaural.
e Press the FM MODE button.
DAB Tuner
No sound.
e Ensure that the CR-H257i has been able to locate
DAB stations.
“NO stations Available” appears on the display.
e Check that antenna is connected (see page 14).
e Ensure that DAB coverage exists in your area.
Cannot access secondary services.
e At the time of publishing not many secondary
services are available, this will increase as more
DAB stations start broadcasting. If a secondary
service station is available, the secondary indicator
>> will be displayed next to the station name.
Display goes out or displayed “service off air”.
e This may occur if a broadcaster changes the label
of a service or removes a label whilst you are
listening to it. The CR-H257i will try to retune to
this station, or alternatively follow the procedure
for auto tune on page 36.
Cannot listen to the selected station.
e Ensure you have pressed the ENTER button when
you want to listen to your selection. The station
you are currently listening to will be displayed on
the first line of the display, as you scroll through
the station order list the second line will show
other station options. Press the ENTER button to
activate your selection.
A burbling sound is heard on some stations.
e DAB like other digital media is good at producing
quality audio from a low level signal, however if
this signal level is too low a “burbling” sound can
sometimes be heard. To reduce this, try
repositioning your antenna to gain maximum
signal strength.
If normal operation cannot be recovered, unplug
the power cord from the outlet and plug it again.