Filter
Top Products
5
Maintenance
If the surface of the unit gets dirty, wipe with a soft
cloth or use diluted neutral cleaning liquid. Be sure
to remove any fluid completely. Do not use thinner,
benzine or alcohol as they may damage the surface
of the unit.
Beware of condensation
When the unit (or a disc) is moved from a cold to a
warm place, or used after a sudden temperature
change, there is a danger of condensation; vapor in
the air could condense on the internal mechanism,
making correct operation impossible. To prevent
this, or if this occurs, leave the unit for one or two
hours with the power turned on. The unit will
stabilize at the temperature of its surroundings.
Memory Backup
If the power supply is interrupted for 14 days or
longer, all the settings kept in memory (such as
preset stations and timer settings) will be erased.
It will take more than 3 days after plugging the
power cord into the outlet to charge enough
electricity for the memory backup function.
Restoring factory settings
If you want to manually initialize the settings, restore
the unit to the factory settings as follows:
1. If the unit is on, turn it off (standby).
2. Hold down the FUNCTION/FM MODE button for
more than 4 seconds until the unit turns on.
All memories are erased, and the unit returns to the
factory settings.