Filter
Top Products
40
Using Function Control 2
DRC value
This option sets the Dynamic Range Control (DRC)
value to be applied to received broadcasts. DRC is
used to reduce the range between high and low
volumes of audio and is sometimes applied at the
broadcast source. Pop music may have a high value of
DRC applied, appropriate for constantly high listening
levels, while classical music broadcasts may have no
DRC applied to allow the listener to hear the full
dynamic range of the source volume.
There are three values of DRC you can apply.
0: None
1/2 : Medium
1: Maximum
While listening to a DAB broadcast press the
FUNCTION button.
Press the TUNING button until “DRC value” is
displayed in the second line of the display.
Press the ENTER button.
3
2
1
Press the TUNING button until the desired
level of DRC is displayed in the second line of
the display.
Press the ENTER button.
Manual tune
This option allows you to manually tune in a channel
and view a continuously updated display of the
strength of the signal. This may be useful when
adjusting or positioning an antenna for better
reception.
While listening to a DAB broadcast press the
FUNCTION button.
Press the TUNING button until “Manual tune”
is displayed in the second line of the display.
2
1
5
4