Filter
Top Products
30
While in stop or playback mode, you can use the
numeric buttons of the remote control to select a
track.
When you use the numeric buttons, press the CD
button of the remote control first.
Press the numeric buttons to select a track.
Playback starts from the selected track.
For instance, to select track number 35, press “3” and
“5”.
To select numbers less than 10, press the number and
then the ENTER button. As an example, to select
number 5, press “5” and the ENTER button.
(Optionally, you may press just the number “5” and
then wait a few seconds.)
Direct Playback (CD/MP3/WMA)
IMPORTANT
Numeric buttons for CD and TUNER
To use the numeric buttons in CD mode or in TUNER
mode, you have to press the CD button or the
TUNER button beforehand to switch the function of
the remote control unit from TUNER to CD (or from
CD to TUNER).
If the remote control unit doesn’t work, press the
CD button or the TUNER button and try again.
(Even when the CD or TUNER button is pressed
without pointing at the main unit, the function of
the remote control unit will be switched.)