Filter
Top Products
38
Using Function Control 1
In DAB mode, use Function Control to set system
options. There are four options in the function control:
Station order, Preset tune, DRC value and Manual
tune.
Station order
Use station order to set the order in which stations are
listed. There are three orders: Favourite, Alphanumeric
and Active.
While listening to a DAB broadcast press the
FUNCTION button.
Press the TUNING button until “Station order”
is displayed in the second line of the display.
Press the ENTER button.
The current option is displayed in the first line of
the display.
3
2
1
Press the TUNING button until the desired
option is displayed in the second line of the
display.
Press the ENTER button.
Fav Station (Favourite station)
As you tune in stations and listen to them the unit
will memorize the top ten stations you listen to and
list them at the top of the channel list. A Favourite
station in the channel list has “ ” displayed after
the station name on the first line of the display.
Alphanumeric
This is the default order. Channels are listed by
name with numbers first and then alphabetically by
letters in the channel name.
Active station
This option will list active stations at the top of the
channel list and channels that are in the list but
have no service in your area to be listed last in the
channel list.
q preset
This option takes your top ten Favourite channels
and assigns them to preset numbers 1 - 10.
This option is only available after “Fav Station”
option has been turned on. See above.
5
4
TUNING
FUNCTION
ENTER