Filter
Top Products
IMPORTANT SAFETY INSTRUCTIONS
TASCAM GA-30CD 19
Change the following GA-30CD settings by pressing
and holding TUNER/SETUP to open the SETUP (MENU)
screen.
Playback mode selection
Tuner mode selection
Tuner speaker output ON and OFF
Initialize effect bank settings
•
•
•
•
Press TUNER/SETUP again to cycle through the
setting items. Use the DOWN and UP keys to adjust the
values for each item and the CENTER key to restore the
default setting.
Press TIME/ESC to finish making settings and close
the SETUP (MENU) screen.
These settings are saved automatically.
Playback mode selection
Use the PLAY item to select whether all tracks on a disc
(ALL) are played or only the currently selected track
(SGL) is played when using the loop playback function.
The default setting is ALL.
Use the TMOD item to set the tuner mode. (See “Using
the tuner” on page 18.)
CHR: chromatic mode (default setting)
GTR: guitar mode
Tuner settings
Use the FXRS item to restore all effect banks to their
factory settings.
NO appears on the LCD when you choose the FXRS
item. Press the DOWN or UP key and YES will appear.
Press and hold the CENTER key to restore all effect
banks to their factory settings.
After initialization is complete, DONE appears on the
LCD and the time display reappears.
CAUTION
Initializing effect banks erases all the preset bank
settings that have been made. Use this function
only if you are sure that you want to overwrite these
settings with the factory defaults.
Initializing effect banks
Tuner speaker output
Use the TOUT item to set whether or not the guitar
signal outputs through the center speaker when the
tuner is turned on. The default setting is OFF.
8 – Changing settings